close
Choose Your Site
Global
Social Media
 |
| Color: | |
|---|---|
| Size: | |
| Material: | |
| Design: | |
OK-505 chrome sled base chair
OKBUY Chair
9401790000
The OK-505 PP plastic sled chair with chrome legs features a one-piece molded polypropylene shell paired with an electroplated steel sled base. Designed for high-traffic commercial environments, this armless seating solution combines lightweight construction with structural stability. Each chair weighs approximately 2.9 kg and supports a maximum load of 150 kg, making it suitable for daily use across various institutional and commercial settings. The chrome-finished frame provides corrosion resistance, while the PP shell is available in multiple color options to match different interior design requirements.
The seat and backrest are formed as a single polypropylene shell through injection molding. This construction eliminates seams and joints that could accumulate dirt or develop structural weaknesses over time. The contoured shape follows the natural curve of the back, providing support during meetings and training sessions of medium duration. The PP material exhibits impact resistance and can be specified with either a matte or glossy surface finish according to project requirements.
The frame is constructed from iron steel tubes with an electroplated chrome finish. The sled base design distributes weight across a continuous contact area with the floor, reducing point pressure and minimizing the risk of floor damage. This base structure also allows chairs to slide smoothly across surfaces without catching on carpet edges or floor seams. The electroplating process creates a reflective surface that resists rust and maintains its appearance through regular cleaning and use.
Chairs are designed to stack vertically when not in use, reducing the storage footprint. This feature benefits venues that require flexible seating arrangements, such as multi-purpose halls and event spaces. Stacked chairs can be moved in groups using appropriate equipment, simplifying room reconfiguration between sessions. The knock-down structure also contributes to reduced shipping volume and lower logistics costs for commercial procurement.
Parameter | Specification |
|---|---|
Model | OK-505 |
Overall Height | 80 cm |
Seat Height | 45 cm |
Seat Width | 54 cm |
Seat Depth | 50 cm |
Unit Weight | Approx. 2.9 kg |
Maximum Load Capacity | 150 kg |
Seat Material | PP Plastic (one-piece molded) |
Frame Material | Iron Steel Tube |
Surface Treatment - Shell | Matte or Glossy PP |
Surface Treatment - Frame | Chrome Electroplating |
Stackable | Yes |
Knock Down Structure | Yes |
Shell Color Options | White, black, red, orange, pink, grey, brown, blue, yellow, green (customizable) |
Frame Color Options | Black, grey, chrome (customizable) |
Applicable Environment | Indoor, semi-outdoor, outdoor |
 |  |
This sled base chair serves multiple use cases across commercial and institutional environments. In office settings, it functions as meeting room seating and visitor chairs for reception areas. Educational facilities including training centers, classrooms, and lecture halls deploy these chairs for their stackability and ease of rearrangement. Public spaces such as waiting areas, community centers, and places of worship benefit from the durable construction and straightforward maintenance. The chairs also support event and hospitality operations, including conference venues, banquet facilities, and temporary seating arrangements for functions.
Production follows established international standards for seating products. The chairs comply with EN 16139 and EN 12520 safety standards for furniture strength, durability, and stability. Additional certifications include CE marking, CA65 compliance, FSC-certified material sourcing where applicable, and REACH compliance for chemical safety. SGS testing validates load performance, with test results documenting capacity up to 600 lbs under specific test conditions. The manufacturing facility operates with over 25 years of chair production experience and supplies customers across more than 70 countries globally.
Located in Hebei Province with proximity to Tianjin Port, the production facility offers efficient logistics routes for international shipments. Standard packaging options include carton packing, stacked packing, bulk packing, and customized packaging solutions to meet specific project requirements. Container loading capacity reaches 1,800 pieces per 40HQ when loaded standing, or 1,014 pieces per 40HQ when packed three units per carton with carton dimensions of 59×57×60 cm. OEM services are available, including custom color matching, logo application, and modifications to dimensions based on order volume. Sample orders are accepted for quality evaluation purposes, with sample production typically completed within 3-5 working days. Mass production lead times range from 1-2 weeks depending on order quantity and customization scope.
Yes, sample orders are available for quality and design evaluation. Mixed samples from different models can be arranged. Sample fees apply and are typically refundable or deductible against subsequent bulk orders, subject to specific order terms.
Sample production generally requires 3-5 working days. Mass production takes approximately 1-2 weeks for standard orders. Larger quantities or custom specifications may require additional time, which will be confirmed during the quotation process.
Custom color options are available for both the PP shell and the metal frame. Logo printing or embossing can be applied to the chairs. Customization details should be confirmed before production begins, with design approval based on sample units.
Multiple packaging methods are offered including individual carton packing, stacked packing, and bulk packing. Shipping can be arranged through sea freight from Tianjin Port, or according to customer-specified logistics preferences. Container loading optimization is calculated based on packaging selection and order quantity.
The OK-505 PP plastic sled chair with chrome legs features a one-piece molded polypropylene shell paired with an electroplated steel sled base. Designed for high-traffic commercial environments, this armless seating solution combines lightweight construction with structural stability. Each chair weighs approximately 2.9 kg and supports a maximum load of 150 kg, making it suitable for daily use across various institutional and commercial settings. The chrome-finished frame provides corrosion resistance, while the PP shell is available in multiple color options to match different interior design requirements.
The seat and backrest are formed as a single polypropylene shell through injection molding. This construction eliminates seams and joints that could accumulate dirt or develop structural weaknesses over time. The contoured shape follows the natural curve of the back, providing support during meetings and training sessions of medium duration. The PP material exhibits impact resistance and can be specified with either a matte or glossy surface finish according to project requirements.
The frame is constructed from iron steel tubes with an electroplated chrome finish. The sled base design distributes weight across a continuous contact area with the floor, reducing point pressure and minimizing the risk of floor damage. This base structure also allows chairs to slide smoothly across surfaces without catching on carpet edges or floor seams. The electroplating process creates a reflective surface that resists rust and maintains its appearance through regular cleaning and use.
Chairs are designed to stack vertically when not in use, reducing the storage footprint. This feature benefits venues that require flexible seating arrangements, such as multi-purpose halls and event spaces. Stacked chairs can be moved in groups using appropriate equipment, simplifying room reconfiguration between sessions. The knock-down structure also contributes to reduced shipping volume and lower logistics costs for commercial procurement.
Parameter | Specification |
|---|---|
Model | OK-505 |
Overall Height | 80 cm |
Seat Height | 45 cm |
Seat Width | 54 cm |
Seat Depth | 50 cm |
Unit Weight | Approx. 2.9 kg |
Maximum Load Capacity | 150 kg |
Seat Material | PP Plastic (one-piece molded) |
Frame Material | Iron Steel Tube |
Surface Treatment - Shell | Matte or Glossy PP |
Surface Treatment - Frame | Chrome Electroplating |
Stackable | Yes |
Knock Down Structure | Yes |
Shell Color Options | White, black, red, orange, pink, grey, brown, blue, yellow, green (customizable) |
Frame Color Options | Black, grey, chrome (customizable) |
Applicable Environment | Indoor, semi-outdoor, outdoor |
| | |
This sled base chair serves multiple use cases across commercial and institutional environments. In office settings, it functions as meeting room seating and visitor chairs for reception areas. Educational facilities including training centers, classrooms, and lecture halls deploy these chairs for their stackability and ease of rearrangement. Public spaces such as waiting areas, community centers, and places of worship benefit from the durable construction and straightforward maintenance. The chairs also support event and hospitality operations, including conference venues, banquet facilities, and temporary seating arrangements for functions.
Production follows established international standards for seating products. The chairs comply with EN 16139 and EN 12520 safety standards for furniture strength, durability, and stability. Additional certifications include CE marking, CA65 compliance, FSC-certified material sourcing where applicable, and REACH compliance for chemical safety. SGS testing validates load performance, with test results documenting capacity up to 600 lbs under specific test conditions. The manufacturing facility operates with over 25 years of chair production experience and supplies customers across more than 70 countries globally.
Located in Hebei Province with proximity to Tianjin Port, the production facility offers efficient logistics routes for international shipments. Standard packaging options include carton packing, stacked packing, bulk packing, and customized packaging solutions to meet specific project requirements. Container loading capacity reaches 1,800 pieces per 40HQ when loaded standing, or 1,014 pieces per 40HQ when packed three units per carton with carton dimensions of 59×57×60 cm. OEM services are available, including custom color matching, logo application, and modifications to dimensions based on order volume. Sample orders are accepted for quality evaluation purposes, with sample production typically completed within 3-5 working days. Mass production lead times range from 1-2 weeks depending on order quantity and customization scope.
Yes, sample orders are available for quality and design evaluation. Mixed samples from different models can be arranged. Sample fees apply and are typically refundable or deductible against subsequent bulk orders, subject to specific order terms.
Sample production generally requires 3-5 working days. Mass production takes approximately 1-2 weeks for standard orders. Larger quantities or custom specifications may require additional time, which will be confirmed during the quotation process.
Custom color options are available for both the PP shell and the metal frame. Logo printing or embossing can be applied to the chairs. Customization details should be confirmed before production begins, with design approval based on sample units.
Multiple packaging methods are offered including individual carton packing, stacked packing, and bulk packing. Shipping can be arranged through sea freight from Tianjin Port, or according to customer-specified logistics preferences. Container loading optimization is calculated based on packaging selection and order quantity.
